This folder contains files related to the reproduction of
both the Cyclops camera presented as a project in the February
1975 issue of Popular Electronics and the Cyclops camera
produced and sold by Cromemco for the Altair and other S-100
bus computers.  Files and brief descriptions:

P4020022.JPG - Back side of CCC interface board 2 REV B.
P4100001.JPG - Reproduction TenTec JW-6 bottom shell, drilled for PE Cyclops, ready for paint.
P4120010.JPG - PE Cyclops board mounted in JW-6.  Bad dry transfer lettering.  Power supply and rear connectors not yet completed.
P4110006.JPG - Painted repro JW-6 bottom shell with real TenTec JW-6 for color compare.
P4140001.JPG - PE Cyclops, later power supply dry fit.
P4030007.JPG - PE Cyclops board, bottom, sockets soldered.
P4030019.JPG - PE Cyclops board, top, sockets, jumpers and some passives.
P4140009.JPG - PE Cyclops output, image of right hand, palm towards camera.
P4120006.JPG - PE Cyclops, early power supply dry fit.
P4020010.JPG - PE Cyclops board, bottom, etched and drilled, not yet cut out.
P4090010.JPG - Unpainted JW-6 repro bottom shell, fitted to other original JW-6 parts.
P4020027.JPG - PE Cyclops board, bottom, etched, drilled and cut out.
P4020002.JPG - PE Cyclops board, bottom, circuit art via toner transfer from magazine page, touched up with permanent magic marker.
P4070003.JPG - PE Cyclops board, bottom, assembly complete, not mounted.
P4020014.JPG - Front side of CCC interface board 1 REV B.
P4110008.JPG - Reproduction TenTec JW-6 bottom shell, drilled for PE Cyclops, painted.
P4020006.JPG - PE Cyclops board, bottom, etched.
P4030011.JPG - PE Cyclops board, top, sockets.
P4040002.JPG - PE Cyclops board, top, sockets, jumpers, transistors and most passives.
P4040005.JPG - PE Cyclops board, bottom, A/B sensor select jumper area.
P4070001.JPG - PE Cyclops board, bottom, assembly complete, not mounted.
P4020018.JPG - Front side of CCC interface board 2 REV B.
cyclops007_mono_multi.jpg - Artwork ready to produce PE Cyclops board via toner transfer.  Four copies of board on one page.
P4020015.JPG - Back side of CCC interface board 1 REV B.
P4060005.JPG - PE Cyclops board, top, complete.
P4140002.JPG - Moskek MK4008 with cap removed for image sensor use.
name_plate.jpg - Image of CYCLOPS name plate from original unit photographed for February 1975 Popluar Electronics.
P4140004.JPG - PE Cyclops, fully assembled, operating.
P4090007.JPG - Repro JW-6 bottom shell, unpainted, undrilled.
P4090009.JPG - Repro JW-6 bottom shell, unpainted, undrilled.  Assembled with original JW-6 parts, top view.
P4140005.JPG - Simple test target.
P4030003.JPG - PE Cyclops board, bottom, toner buffed off, ready for soldering.
P4140006.JPG - PE Cyclops, output with no sensor installed.
P4060006.JPG - PE Cyclops board, bottom, assembly complete except wire harness.
P4020024.JPG - Board to board cable, CCC board set, REV B.
P4090009-2.JPG - Repro JW-6 bottom shell, unpainted, drilled for lens, lens test mounted.
P4140003.JPG - PE Cyclops, fully assembled, operating.  Top view, view includes scope connections.
P4140008.JPG - PE Cyclops, test target image on scope display.
P4120005.JPG - PE Cyclops, early power supply dry fit.
P4120003.JPG - PE Cyclops, back panel dry fit with dry transfer lettering.  Lettering is wrong size and font.
P4090001-2.JPG - PE Cyclops, back panel dry fit, unpainted.
acc-1-front.jpg - Cromemco Cyclops, ACC-1 board repro, component side.  Image generated from Gerbers in progress.
acc-1-back.jpg - Cromemco Cyclops, ACC-1 board repro, back side.  Image generated from Gerbers in progress.